The most intelligent approach to outdoor audio.
12 mounting options.
You will love the Park Stevens PS4 Landscape Speaker. Smaller than a paperback book, with a surprising amount of punch and bass, this 100% aluminum speaker is the basis for our 12-option mounting system.
Free of the constraints associated with typical outdoor products, the Park Stevens system uses an ingenious speaker + mount system for discrete placement in every outdoor environment.
House mounting.
Use the flush mount wall kit to mount the speaker flat to a surface, as shown above. Use the ceiling/wall kit to mount the speaker pendulum style from above or to to decks, railings, and fireplaces.
Ground mounting.
Use the garden spike to place the PS4 along a pathway, in the garden, or in a flower pot. Use the multi-mount adaptor to run two PS4′s in a V pattern in corners.
Direct burial.
For a nearly invisible installation, bury the PS4 directly into the ground, facing up. The hard-anodized 100% aluminum enclosure is waterproof and impervious to ground freezing. Leveling rings keep the speaker face slightly above ground height. For protection, use the Top Hat kit, or flat rock shroud. Both blend seamlessly with the surroundings.
Four PS4 models and two colors to choose from.
The PS4 comes in four varieties: a single driver 8 ohm and 70V version, and a dual driver 8 ohm and 70V version.
Use the single driver model for garden and direct burial applications. Use the dual driver version for flush-to-the-wall mounting. The dual driver model can be wired in stereo or mono.
The PS10 subwoofer is just as versatile.
Measuring about 13 x 15″, the all-aluminum enclosed PS10 subwoofer follows the same speaker + mount strategy. There are four ways to mount a PS10. Use the deck kit to strap the subwoofer underneath a deck or patio. Use the spike kit for garden and pathway mounting. Use the direct burial bandpass kit with the Top Hat or rock shroud when hiding in the ground. Or place the subwoofer on any flat surface — no mounting kit required.
Two ways to wire the system: 70V or 8 ohm.
The PS4 speakers can be run 8 ohm or 70V. The PS10 subwoofer is 8 ohm. The Park Stevens multi-mode amplifier can run 8 ohm, 70V, or a combination of the two. You can string 6 PS4 70V speakers and 1 PS10 subwoofers from a single Park Stevens amplifier.
Unrivaled sound quality.
The PS4 is the smallest, loudest, broadest frequency range weatherproof speaker available. Without question. Inside the aluminum housing is a water-resistant high-output driver that delivers 90 dB of SPL at 20 feet away with 32 watts of power. With bass response to 68 Hz (-6dB), the PSE4 is a great standalone speaker.
The PS10 subwoofer, with its 3″ voice coil, aluminum cone, and water-resistant construction, plays loud to 28 Hz. We recommend one PS10 subwoofer for every 6 PS4 speakers for balanced sound.
Built for the long run.
The PS4 speaker uses an aluminum enclosure powder coated black or white. You can paint the either version to match your home. All exposed hardware, including the mounting hardware, is either aluminum or stainless steel. There are no terminals on the speaker, rather a set of wire leads is drawn from the enclosure through a marine-grade sealed barrier. Behind the die-cast aluminum grille is a sheet of water-resistant fabric that stops moisture, yet is acoustically invisible. To combat melting snow and water from sprinklers, discrete drainage holes around the driver pull standing water away. For systems wired with conduit, we offer a conduit coupling device to eliminate speaker wire degradation.
| Model | PS4 | PS4-D | PS10 |
|---|---|---|---|
| Description | Landscape satellite speaker | Dual driver landscape speaker | Landscape subwoofer |
| 90 dB Coverage Area | Up to 20' (6.1 m) from speaker | Up to 20' (6.1 m) from speaker | Up to 40' (12 m) from speaker |
| Max Output | 100 dB each, with 32w | 104 dB each, with 32w | 116 dB with 500w |
| Near-Field Response (-3dB) | 80-20,000 Hz | 80-20,000 Hz | 34-200 Hz |
| 6dB Downpoint | 68 Hz | 68 Hz | 28 Hz |
| Nominal Coverage Angle | 120° radial | 180° radial | NA |
| Sensitivity [1w (2.83 V) at 1m] | 86 dB | 86 dB | NA |
| Nominal Impedance | 8 ohms (70V available) | 4 ohms (70V available) | 4 ohms |
| Drive Unit | 4" aluminum cone | Dual 4" aluminum cones | NA |
| Construction | Powder coated aluminum enclosure and grille | Powder coated aluminum enclosure and grille | Powder coated aluminum enclosure and grille |
| Weight | 4 lbs., (1.8 kg) | 6 lbs., (2.7 kg) | 27 lbs., (12.2 kg) |
| Dimensions (HWD) | 6-1/2 x 9" (165 x 229 mm) | 6-1/2 x 9" (165 x 229 mm) | 15-1/4 x 13-1/2" (387 x 343 mm) |
| Mounting Accessories | Ceiling/Wall Kit, Flush Mount Kit, Garden Spike, Direct Burial Top Hat Kit, Multi-Mount Adaptor | Ceiling/Wall Kit, Flush Mount Kit, Garden Spike, Multi-Mount Adaptor | Garden Spike, Underdeck Kit, Burial Kit with Bandpass Enclosure |
PS4-DW on Patio
Park|Stevens Worksheets